Steel Cutting Saw Blades For Cutting Mild Steel: Pipe, Angle Iron, Flat Bar and Rebar

Choosing the Right Saw Blade

Tooth Geometry Explained

Combination Table Saw Blades

Miter Saw Blades

Radial Arm and Chop Saw Blades

Rip Saw Blades

Glue Joint and ATB Rip Saw Blades

Trim Blades for Table Saws

Aluminum Cutting Blades

General Purpose Table Saw Blades - ATB

General Purpose Table Saw Blades - TCG

Dado Sets

Plastic Cutting Blades

Melamine Saw Blades

Solid Surface Blades

Steel Cutting Blades

Our Policies

Contact Us

These steel cutting saw blades use micro-grain tips with titanium to provide greater impact strength and durability. They cut through ferrous metal like angle iron, steel pipe, flat bar, and rebar. This is a MUCH better way to cut steel than with an abrasive disc: faster, cleaner and not all the sparks flying.

Please note maximum RPM for each blade. The 12" and 14" models are intended for use on low RPM dry-cut saws only.

Diameter	Teeth	Bore	Kerf	Plate	Design	Hook	Max RPM	Item #	Price
7 1/4"	48T	5/8"/KO	.087"	.071"	ST	0	3500	ST748*	65.00
8"	50T	5/8"	.087"	.071"	ST	0	3500	ST850K	70.00
10"	50T	5/8"	.094"	.071"	ST	0	2800	ST1050	108.00
12"	60T	1"	.094"	.079"	ST	0	1800	ST1260	126.00
12"	80T	1"	.094"	.079"	ST	0	1800	ST1280	144.00
14"	72T	1"	.094"	.079"	ST	0	1700	ST1472	144.00
14"	90T	1"	.094"	.079"	ST	0	1700	ST1490	162.00

*  Has a knock-out bushing to adapt to a worm drive saw